An object, previously at rest, slides #9 m# down a ramp, with an incline of #pi/6 #, and then slides horizontally on the floor for another #11 m#. If the ramp and floor are made of the same material, what is the material's kinetic friction coefficient?
WARNING: LONGish ANSWER!
We're asked to find the coefficient of kinetic friction,
We'll split this problem into two parts: the first part is where the object is sliding down the incline, and the second part is where it is sliding across the floor.
The only two forces acting on the object as it slides down the ramp are

The gravitational force (its weight; acting down the ramp)

The kinetic friction force (acting up the ramp because it opposes motion)
The expression for the coefficient of kinetic friction
#mu_k# is#ul(f_k = mu_kn# where

#f_k# is the magnitude of the retarding kinetic friction force acting as it slides down (denoted#f# in the above image) 
#n# is the magnitude of the normal force exerted by the incline, equal to#mgcostheta# (denoted#N# in the above image)The expression for the net horizontal force, which I'll call
#sumF_(1x)# , is#ul(sumF_(1x) = overbrace(mgsintheta)^"gravitational force"  overbrace(color(red)(f_k))^"kinetic friction force"# Since
#color(red)(f_k = mu_kn)# , we have#sumF_(1x) = mgsintheta  color(red)(mu_kn)# And since the normal force
#n = mgcostheta# , we can also write#ul(sumF_(1x) = mgsintheta  color(red)(mu_kmgcostheta)# Or
#ul(sumF_(1x) = mg(sintheta  mu_kcostheta))# #" "# Using Newton's second law, we can find the expression for the acceleration
#a_(1x)# of the object as it slides down the incline:#ul(sumF_(1x) = ma_(1x)# #color(red)(a_(1x)) = (sumF_(1x))/m = (mg(sintheta  mu_kcostheta))/m = color(red)(ul(g(sintheta  mu_kcostheta)# #" "# What we can now do is apply a constantacceleration equation to find the final velocity as it exits the ramp, which we'll call
#v_(1x)# :#ul((v_(1x))^2 = (v_(0x))^2 + 2(a_(1x))(Deltax_"ramp")# where

#v_(0x)# is the initial velocity (which is#0# since it was "previously at rest") 
#a_(1x)# is the acceleration, which we found to be#color(red)(g(sintheta  mu_kcostheta)# 
#Deltax_"ramp"# is the distance it travels down the rampPlugging in these values:
#(v_(1x))^2 = (0)^2 + 2color(red)(g(sintheta  mu_kcostheta))(Deltax_"ramp")# #" "#
#ul(v_(1x) = sqrt(2color(red)(g(sintheta  mu_kcostheta))(Deltax_"ramp"))# This velocity is also the initial velocity of the motion along the floor.
#bb("FLOOR")# As the object slides across the floor, the plane is perfectly horizontal, so the normal force
#n# now equals#n = mg# The only horizontal force acting on the object is the retarding kinetic friction force
#f_k = mu_kn = mu_kmg# (which is different than the first one).
The net horizontal force on the object on the floor, which we'll call
#sumF_(2x)# , is thus#ul(sumF_(2x) = f_k = mu_kmg# (the friction force is negative because it opposes the object's motion)
Using Newton's second law again, we can find the floor acceleration
#a_(2x)# :#color(green)(a_(2x)) = (sumF_(2x))/m = (mu_kmg)/m = color(green)(ul(mu_kg# #" "# We can now use the same constantacceleration equation as before, with only a slight difference in the variables:
#ul((v_(2x))^2 = (v_(1x))^2 + 2(a_(2x))(Deltax_"floor")# where this time

#v_(2x)# is the final velocity, which since it comes to rest will be#0# 
#v_(1x)# is the initial velocity, which we found to be#sqrt(2color(red)(g(sintheta  mu_kcostheta))(Deltax_"ramp")# 
#a_(2x)# is the acceleration, which we found to be#color(green)(mu_kg# 
#Deltax_"floor"# is the distance it travels along the floorPlugging in these values:
#(0)^2 = [sqrt(2color(red)(g(sintheta  mu_kcostheta))(Deltax_"ramp"))color(white)(l)]^2 + 2(color(green)(mu_kg))(Deltax_"floor")# Rearranging gives
#2(color(green)(mu_kg))(Deltax_"floor") = 2color(red)(g(sintheta  mu_kcostheta))(Deltax_"ramp")# #" "# At this point, we're just solving for
#mu_k# , which the following indented portion covers:Divide both sides by
#2g# :#mu_k(Deltax_"floor") = (sintheta  mu_kcostheta)(Deltax_"ramp")# Distribute:
#mu_k(Deltax_"floor") = (Deltax_"ramp")sintheta  (Deltax_"ramp")mu_kcostheta# Now, we can divide all terms by
#mu_k# :#Deltax_"floor" = ((Deltax_"ramp")sintheta)/(mu_k)  (Deltax_"ramp")costheta# Rearrange:
#((Deltax_"ramp")sintheta)/(mu_k) = Deltax_"floor" + (Deltax_"ramp")costheta# Finally, swap
#mu_k# and#Deltax_"floor" + (Deltax_"ramp")costheta# :#color(red)(ulbar(stackrel(" ")(" "mu_k = ((Deltax_"ramp")sintheta)/(Deltax_"floor" + (Deltax_"ramp")costheta)" "))# #" "# The question gives us

#Deltax_"ramp" = 9# #"m"color(white)(al# (distance down ramp) 
#Deltax_"floor" = 11# #"m"color(white)(aa# (distance along floor) 
#theta = pi/6color(white)(aaaaaa.# (angle of inclination)Plugging these in:
#color(blue)(mu_k) = ((9color(white)(l)"m")*sin((pi)/6))/(11color(white)(l)"m"+(9color(white)(l)"m")·cos((pi)/6)) = color(blue)(ulbar(stackrel(" ")(" "0.239" "))# Notice how the coefficient doesn't depend on the mass
#m# or gravitational acceleration#g# if the two surfaces are the same...




By signing up, you agree to our Terms of Service and Privacy Policy
To find the coefficient of kinetic friction, we can use the equation:
[d = \frac{1}{2} \cdot g \cdot t^2]
where (d) is the distance traveled, (g) is the acceleration due to gravity, and (t) is the time. We know that the object slides 9 m down the ramp, which is at an angle of (\pi/6), and then slides horizontally for another 11 m.
First, we'll find the time it takes for the object to slide down the ramp using the equation of motion:
[d = \frac{1}{2} \cdot g \cdot t^2]
[9 = \frac{1}{2} \cdot 9.8 \cdot t^2]
[t^2 = \frac{9 \cdot 2}{9.8}]
[t^2 = 1.837]
[t \approx 1.354]
Next, we'll find the coefficient of kinetic friction on the horizontal surface. We'll use the equation:
[f_k = \mu_k \cdot N]
where (f_k) is the force of kinetic friction, (\mu_k) is the coefficient of kinetic friction, and (N) is the normal force.
Since the object is sliding horizontally, the normal force is equal to the weight of the object. The weight of the object can be found using:
[W = m \cdot g]
where (m) is the mass of the object and (g) is the acceleration due to gravity.
We'll use the equation:
[W = \frac{1}{2} \cdot g \cdot t^2]
to find the mass of the object.
[W = \frac{1}{2} \cdot 9.8 \cdot (1.354)^2]
[W \approx 9.851]
Now, we can find the coefficient of kinetic friction:
[f_k = \mu_k \cdot W]
[11 = \mu_k \cdot 9.851]
[\mu_k \approx \frac{11}{9.851}]
[\mu_k \approx 1.117]
So, the coefficient of kinetic friction of the material is approximately 1.117.
By signing up, you agree to our Terms of Service and Privacy Policy
When evaluating a onesided limit, you need to be careful when a quantity is approaching zero since its sign is different depending on which way it is approaching zero from. Let us look at some examples.
When evaluating a onesided limit, you need to be careful when a quantity is approaching zero since its sign is different depending on which way it is approaching zero from. Let us look at some examples.
When evaluating a onesided limit, you need to be careful when a quantity is approaching zero since its sign is different depending on which way it is approaching zero from. Let us look at some examples.
When evaluating a onesided limit, you need to be careful when a quantity is approaching zero since its sign is different depending on which way it is approaching zero from. Let us look at some examples.
 A box with an initial speed of #8 m/s# is moving up a ramp. The ramp has a kinetic friction coefficient of #7/5 # and an incline of #(5 pi )/12 #. How far along the ramp will the box go?
 If an object is moving at #4 m/s# over a surface with a kinetic friction coefficient of #u_k=12 /g#, how far will the object continue to move?
 An object with a mass of #1 kg# is lying still on a surface and is compressing a horizontal spring by #1/3 m#. If the spring's constant is #6 (kg)/s^2#, what is the minimum value of the surface's coefficient of static friction?
 An object, previously at rest, slides #4 m# down a ramp, with an incline of #pi/4 #, and then slides horizontally on the floor for another #7 m#. If the ramp and floor are made of the same material, what is the material's kinetic friction coefficient?
 How does newton's third law apply to balloon cars?
 98% accuracy study help
 Covers math, physics, chemistry, biology, and more
 Stepbystep, indepth guides
 Readily available 24/7